Dyn-Optics™ Fire Finder II Infrared Heat Sensor

Accessories

Product/Description	Price	Qty
(1) AA-Cell Procell Battery, Alkaline, 1.5V	$0.59

Full Product Info

Features and Specifications:

• Tested and certified intrinsically safe to be used in explosive environments, in conformity with MIL-STD-202F, method 109B
• Sensitivity: Responds to 200°F hot area one foot square at 20 feet
• Heat Indication: An audible alarm will sound when the Fire Finder Ii is pointed at a hot spot. The pitch of the alarm is proportional to the temperature – the higher the temperature, the higher the pitch
• Sensitivity to sunlight: Detects a cigarette on a hot sidewalk in full sunlight
• Response Time: Less than 0.1 second to full audible alarm
• Construction: Durable, water-resistant aluminum housing. No plastic components
• Operation: Simple on/off switch
• Built-in self-test: Initiated when unit is turned on to assure the operator unit is functioning properly. Assures the firefighter that the Fire Finder II is operational before entering a low-visibility, smoke-filled, fire environment
• Power: Four 1.5-volt AA batteries that can easily be replaced by removing rear cover
• No eye attention is required to read meters or interpret lights
• Verifies fire is extinguished
• Seeks out residual embers in full sunlight
• Detects transparent chemical fire during haz-mat incidences
• Finds hot spots
• Locates overheated ballasts in fluorescent lights
• Identifies overheated machinery
• Spots hot wiring
• Prevents rekindle by locating residual embers during overhaul
• Infrared heat sensor will detect a small hot spot that the firefighters' eyes may miss, even through a glass window
• Help-Wanted Alarm (activated by the firefighter)
• Batteries-Need-Changing Alarm
• Operates in full sunlight or in a dense, smoke-filled room
• Testimonials:
  • Fire Finder was very effective and compatible with shipboard environment
  • We were so satisfied that we purchased one for each truck; it increased mop-up effectiveness
  • Shows need for complete extinguishment and overhaul
  • Valuable in locating hot spots that are inaccessible
  • Fire Finder is one of the finest job and time saving pieces of equipment we have
  • Fire Finder is easy to operate. Our people prefer it to the thermal imager camera....at a lot less money
• Three-year limited warranty for parts and labor when used as directed
• The original Fire Finder was developed by Dyn-Optics in 1980 and has been upgraded on several occasions
• Patented. Dyn-Optics has a patent on the Fire Finder. Any other device representing to be a Fire Finder or heat sensor may be counterfeit or infringe on the patent