888.588.8569

Bullard PX Series Thermoplastic Structural Fire Helmet

If you are looking for proven on-the-job performance and long lasting durability then look no further than the PX Series from Bullard. The PX Series from Bullard is a thermoplastic, heavy duty, contemporary style structural fire helmet. This fire helmet features a rugged design that will not scratch, crack or chip like fiberglass. It incorporates recommendations from veteran firefighters around the world and is Certified to NFPA 1971-2013.

The sleek design of the PX Fire Helmet offers lightweight comfort and a low center of gravity that provides a balanced and stable fit increasing the overall comfort of this helmet. The PX is designed for exceptional balance, comfort, stability and interface with SCBA equipment. The Bullard Sure-Lock® ratchet headband offers both easy-turn ratchet sizing and a unique three position height adjuster to create a completely personalized fit. The standard leather ratchet cover increases the overall comfort of the PX Helmet.

The PX Series of fire helmets provides maximum visibility with 3M Scotchlite® striping, which retains reflectivity to 500°F (260°C). This makes Scotchlite® the toughest material available for helmet markings.

PX Series Options:

R330 4" Faceshield – a unique optically-correct faceshield. The R330 eliminates distortion found in some faceshields and reduces eye stress and fatigue. Faceshield are mold-formed which means less stress cracking and longer lasting faceshields.

ESS Innerzone Goggles – High-Performance Goggles that provide additional eye protection that can address primary eye protection issues defined in NFPA 1500 OSHA Standards 29 CFR and ANSI Z87.1 requirements. The Innerzone Goggles offer full perimeter filtered ventilation of the goggle frame which allows humid air to escape. This combined with anti-fog lens coating makes the goggle resist fogging better than any other goggle. Vent filters help keep dust particles and liquids out.

Bullard TrakLite® – This series gives you an option of including the Bullard TrakLite® integrated helmet lighting system. TrakLite® blends engineering, functionality and safety to help firefighters see forward in dark or smoky conditions. The lightweight Bullard TrakLite® is designed to help increase the functional performance of your fire helmet without bulky or cumbersome additions. It features eight white LEDs protected by heat resistant glass with no external clips, brackets or wires. Bullard TrakLite helps provide increased safety over traditional helmet-mounted lighting, reducing the likelihood of weight imbalance or snagging. Unlike other fire helmet lights, the weight of TrakLite is distributed between the front and rear of the helmet to offer a more balanced lighting solution. TrakLite works exclusively with Bullard helmets, and all available configurations of the helmets and TrakLite meet NFPA 1971-2013 requirements. Additionally, TrakLite is completely waterproof. Easily operable with a gloved hand, the single rotary switch powers both the front LEDs and the rear buddy indicator light. Powered by four AAA batteries, TrakLite is energy efficient, with a runtime of at least six continuous hours at a minimum brightness level of 50%. The standard AAA alkaline batteries are both easy and fast to replace by the user in the field.

SPECIFICATIONS:

  • Contemporary Styling
  • Ultem® Thermoplastic Outer Shell Offers the Ultimate in Impact and Penetration Resistance
  • M-PACT Plus Molded Inner Liner System Protects Head Against Heat Rise and Provides an Extra Layer of Protection Against Falling Objects.
  • Comfortable Sure-Lock® Ratchet Headband with Comfort Brow Pad. (brow pad is removable, washable and replaceable)
  • Three Position Ratchet Height Adjuster
  • Leather Ratchet Cover
  • Stainless Steel D-Ring, Allows you to Hang Your Helmet
  • Balanced 6-Point Nylon Crown Straps and Crown Pad Provides an Extra Level of Comfort
  • Nomex® Chinstrap with Quick-Release Buckle and Postman’s Slide Fastener
  • Rip-Stop Nomex® Ear/Neck Protector Provides Premium Protection in High Heat Situations.
  • 3M Scotchlite® Reflective Striping, Retains Reflectivity up to 500°F (260°C). No Burning, Cracking or Peeling.
  • Exceeds the NFPA 1971 Standard on Protective Ensemble for Structural Fire Fighting and Proximity Fire Fighting, 2013 Edition Pertaining to Structural Fire Helmets

OPTIONS:

  • PX – 6" Faceshield, No Lighting
  • PXTL – 6" Faceshield, With TrakLite
  • PXG – ESS Innerzone Goggles, No Lighting
  • PXGTL – ESS Innerzone Goggles, With TrakLite
  • Available in Multiple Colors
  • Personalized Leather Fronts can be Ordered, Contact Customer Service for this Option

FREE standard shipping for online orders with with an order total of $99 or higher.
$6.95 standard shipping for online orders with an order total of $98.99 or below. Qualifying amount applies to merchandise only. Subject to change without notice. Offer valid for standard shipping within the contiguous United States (some restrictions apply such as shipping to Canada, Alaska, Hawaii, and all other destinations outside the continental United States including APO and FPO addresses are not eligible for this promotion and may incur additional charges). Additional fees apply to haz-mat/chemicals/ aerosols, over sized or unusually heavy items/orders,including but not limited to ladders, fire hose, pepper spray, fire extinguishers, full-size light bars and spike strips. Some vendors are also excluded, view a list of excluded brands here.


Shipping rates apply to all products. Some orders may require additional shipping charges.

Standard Shipping Charges

Charges for addresses in the contiguous United States only.
Order Total Standard 2-Day Air** Next Day Delivery
Up to $25 $8.49 $6.95 $28.48 $33.48
$25.01 to $50.00 $10.49 $6.95 $30.48 $35.48
$50.01 to $98.99 $12.49 $6.95 $32.48 $37.48
$99.00 to $150.00 $14.49 $0 $34.48 $39.48
$150.01 to $200 $16.49 $0 $36.48 $41.48
$200.01 to $250.00 $18.49 $0 $38.48 $43.48
$250.01 to $300.00 $20.49 $0 $40.48 $45.48
$300.01 to $350.00 $23.49 $0 $43.48 $48.48
$350.01 to $400.00 $25.49 $0 $45.48 $50.48
$400.01 to $500.00 $27.49 $0 $47.48 $52.48
$500.01 to $750.00 $31.49 $0 $51.48 $56.48
$750.01 to $1,000 $34.49 $0 $54.48 $59.48
$1,000.01 and over $38.49 $0 Contact us for a quote

Bullard PX Series Thermoplastic Structural Fire Helmet

Item #: PXSERIES
Please wait while we load product options.

No reviews have been submitted for Bullard PX Series Thermoplastic Structural Fire Helmet
Be the first to write a review.

Bullard Fire Helmets
bullard company Founded in 1898, E.D. Bullard Company is a leading manufacturer of high quality firefighter and rescue helmets. Headquartered in Cynthiana, Kentucky, Bullard is a fourth-generation, family-owned enterprise whose employees are committed to excellence in every product category. Bullard offers a full line of fire helmets to firefighters and other first responders throughout the world, from traditional fiberglass helmets to the very latest in high-heat advanced thermoplastic helmets. These products are known to provide outstanding head protection, superior comfort, unmatched durability and excellent on-the-job performance. Shop Bullard Firefighting Helmets
bullard fire helmets

Write Your Own Review

You're reviewing: PX Series Thermoplastic Structural Fire Helmet

  •  
    1 star
    2 stars
    3 stars
    4 stars
    5 stars
    Price
    Value
    Quality

* Required Fields

Product Name Price In Stock Shipping Time SKU Qty