Monadnock Mariner Series 24" Baton

Full Product Info

Features and Specifications:

• Material: Hardened, aircraft quality 4130 cold drawn condition seamless alloy steel tubing (A.S.T.M.-A-519)
• Hardness: Striking surface hardened and then tempered to 48-54 Rockwell C Scale to relieve brittleness
• Tensile Strength: 240,000-290,000 psi
• Length Closed: 9"
• Length Opened: 24"
• Weight: 19 oz.
• Retention Clip: Nickel plated, attached to end cap bore guide with a solid rivet; assembly is replaceable
• Ball Tip Construction: Machined, hardened steel (RC 39 - 45), 5/8" diameter, electroless nickel
• Overall Corrosion Resistance: Exceeds A.S.T.M.-B117 Salt spray test
• Quality Control Program:
  • In-process inspection at every operation plus 100% inspect and testing prior to shipment
  • In-process inspection consistent with US Department of Defense MIL-STD-105E and United Kingdom Defense Ministry Specification DEF-131-A
  • All 4130 steel tubing has mill certification including the chemical analysis of steel
• Warranty: All Monadnock expandable police batons have a lifetime repair or replacement guarantee, under normal field use, against breaking, bending, torn grip, and if rust or corrosion prevents the baton from functioning.
• Liability Insurance: $3,000,000
• Litigation Support: Monadnock has provided expert testimony on behalf of police officers and agencies for nore than 25 years
• Handle:
  • Surface: Firm foam grip 1-1/16" diameter, tear strength minimum 82 pounds per linear inch, installed over knurled handle surface to eliminate slippage
  • Tubing: 7/8" outside diameter, 14 gauge (.083" wall thickness)
  • Length: 8-¼"
  • Coating: Electroless nickel plating
• Middle Shaft:
  • Tubing: 5/8" outside diameter; 16 gauge (.065" wall thickness)
  • Length: 7-5/8"
  • Coating: Electroless nickel
• Small Shaft:
  • Tubing: 7/16" outside diameter, 14 gauge (.083 wall thickness)
  • Length: 8-½"
  • Coating: Electroless nickel
• End Cap:
  • Construction: Machined steel with integral bore guide (bore guide centers small shaft during closure to prevent retention clip breakage) male threads with O-ring seal between cap and handle
  • Coating: Electroless nickel plating