Hammerhead Industries Gear Keeper for Large Flashlights & Tool Packs

Full Product Info

Features and Specifications:

• Recommended lights include:
  • (3-C to 2-D, Rechargeables)
  • Pelican Super Sabre & 'Big Ed'
  • Streamlight 3-C & Survivor
• Avoids loss of flashlight
• Side Release System allows gear to be easily connected or disconnected
• Typically, the pin-mount Gear Keeper is used in one of the following manners:
  • Mount Gear Keeper (Pin Mount) inside a pocket. Store the light in the pocket when not in use, hang the light out of the pocket while it is being used
  • Mount Gear Keeper to a flashlight tab in the Chest area. Light dangles when not in use
  • Mount Gear Keeper to a belt next to a holster. Use the Side Release Lanyard to allow the light to be stored in a holster when not in use
• Typically, the Snap-Clip Gear Keeper is used in one of the following manners:
  • Mount Gear Keeper to a D-Ring in the Chest area. Light dangles when not in use
  • Mount Gear Keeper to a belt next to a holster. Use the Side Release Lanyard to allow the light to be stored in a holster when not in use
• Use the Side Release System accessory to allow the flashlight to be easily connected/disconnected to the Gear Keeper
• Mounting System:
  • Stainless Steel threaded Pin (stud) penetrates mic tab, radio pocket, or webbing harness, threads into back of Gear Keeper
  • Snap Clip attaches to any D-Ring or belt loop
• Warning! Penetration of turnout coat (other than external tabs or pockets) may result in violation of N.F.P.A. standards or may void manufacturer's warranty
• Nylon line with Kevlar core
• Stainless steel spring and hardware
• 32" extension
• 20 oz. retraction force
• 80 lbs. breaking strength
• Side Release System with accessories