Tempest Technologies Ventmaster 576XT Fire/Rescue Chainsaw with Depth Gauge

Full Product Info

Features and Specifications:

• Higher peak power and 20% more torque
• Maximum cutting power over a longer range while improving productivity
• One Step Starting combines the choke, throttle lock and stop mechanism all in one switch, eliminating flooding and allowing fast convenient starting, even while wearing gloves
• Raptor Carbide-tipped chain:
  • Engineered to withstand the rigors of fire service operation
  • Cuts quicker and lasts longer than bullet chain or single raker carbide chain
  • No other chain is designed better for Fire/Rescue operations, ventilation, and forcible entry and RIT operations
  • Cuts tar and asphalt roofing materials, nails, wire-reinforced belting, light gauge sheet metal, garage and metal clad entry doors
  • Also ideal for disaster cleanup
  • Chain comes in a .404 pitch, .063 gauge, the largest, heaviest chain available for handheld saws
• Tool-Less "KIS-40" Depth Gauge
  • Accurately control cutting depth to protect operator and safely speed cutting
  • Removes and installs in seconds without tools
• More Power Where You Need It: The X-TORQ engine design increases torque over a wider rpm range and results in maximum cutting power
• Optimized Saw Body: A smooth underside, rounded starter cover and well-protected controls make the saw easy to handle, reduce the risk of getting caught in materials and make transportation easier
• Air Injection: Centrifugal air cleaning system for longer intervals between filter cleaning, smoother operation and reduced wear
• Improved Handle Design: The rear handle is asymmetrically designed with comfort inserts for a more solid and less tiring grip
• Durability: High-performance filter for increased longevity
• Smart Start: The engine and starter have been designed so the machine starts quickly with minimum effort. Resistance in the starter cord is reduced by up to 40%
• Cylinder Displacement: 4.50 cu.in. (74cc)
• Carburetor, Type: ZAMA C1M-EL28
• Power: 5.7 hp (4.2 kW)
• Carburetor Setting, High/Low: CAPS/CAPS
• Idling Speed: 2,700 rpm
• Fuel Tank Volume: 1.48 US pint (0.7 l)
• Maximum Power Speed, Working Load: 9,600 rpm
• Oil Tank Volume: 0.78 US pint (0.37 l)
• Max. Recommended Engine Speed, No Load: 13,600 rpm
• Oil Pump Type: Adjustable Flow
• Bore: 2.01 in. (51.05 mm)
• Oil Pump Capacity: 5.0-22.0 m/s
• Stroke: 1.42 in. (36.07 mm)
• Chain Speed at Maximum Power: 21.4 m/s
• SEM AM50 Ignition System:
  • Type: CD
  • Manufacturer: SEM
  • Spark Plug: NGK BPMR 7A / Champion / RCJ 7Y
  • Gap: 0.02 in. / 0.51 mm
• Sound Level: 107 dB(A)
• Ignition Module Air Gap: 0.02 in. (0.51 mm)
• Noise Emissions, LWA: 115 dB(A)
• Vibrations
  • Front Handle: 3.2 m/s2
  • Rear Handle: 3.4 m/s2
• Dry Weight, No Cutting Equipment or Accessories: 14.5 lbs. (6.62 kg)
• Engine:
  • Type: X-Torq, Single cylinder
  • Displacement: 4.5 cu. in. (74cc)
  • Bore: 2.01 in. (51.05 mm)
  • Stroke: 1.42 in. (36.07 mm)
  • Max Engine Power 5.7 hp (4.2 kW) @ 9600 rpm
• Starting System: Volt Tech ignition, Smart Start decompression valve
• Kill Switch: Semi-Automatic choke/switch function, the Kill Switch is reset each time when the choke is pulled to start
• Air Filter: Heavy-duty, pleated, synthetic material
• Fuel and Engine Lubrication:
  • Gasoline Octane Rating: Use 87 octane or higher
  • Fuel/Oil Mix Ratio: 50:1 petroleum base 2-cycle oil
  • Fuel Tank Capacity: 1.48 US Pint / 0.7 liter
• Drive System:
  • Type: CoolFlo clutch, vented to circulate air reducing heat on the main bearings and seals
  • Style: Drum System
  • Size: .404 by 7 tooth
  • Chain Speed: 4200 ft/minute
• Anti-Vibration System:
  • All steel spring anti-vibration system provides reduced vibrations
  • Steel springs are impervious to dirt and fuel deterioration
• Vibration Levels:
  • Front Handle: 3.2 m/s2
  • Rear Handle: 3.4 m/s2
• Quick-Release Snap Lock Cylinder Cover allows quick inspection and cleaning of all critical engine components
• High-Alloy Guide Bar:
  • Designed for "plunge cuts" and maximum carbide chain performance
  • Precision-milled guide grove, hardened rails, integrated totally sealed nose bearings
  • Type: Sprocket Nose, one-piece bar, laser-cut, center-slot for guard/depth gauge
  • Style: High-speed titanium with sealed bearings
  • Cutting Lengths: 16" and 20"
  • Size: .404 pitch, .063 gauge
• Weight (Power Head only): 14.6 lbs. (6.62 kg)
• Cutting Chain
  • VentMaster Raptor Chain
  • Type: Carbide tipped, extra-wide gullet, self-cleaning
  • Size: .404 pitch, .063 gauge
• Cutting Chain Lubrication System:
  • Type: Automatic
  • Drive System: Centrifugal clutch
  • Lubricant: Husqvarna
  • Oil Tank Capacity: 0.78 US pint / 0.37 liter
• Handles:
  • Rear: Ergonomically shaped to conform to user hand
  • Front: Full wrap around design
• Chain Tensioner allows side access for easy service
• Guard/Deflector
  • Type: Steel Plate
  • Protects muffler
  • Diverts dirt and debris away from power head, engine runs cooler, less maintenance
• Chain Brake Type: Inertia activated
• "Scrench Tool" and Tool Holder: Standard tool is readily available for quick adjustments or maintenance
• Depth Gauge
  • Function: Control of cutting depth
  • Depth of Cut: 1/4" to 6"