Grace Industries SuperPass II™ Device

Accessories

Product/Description	Price	Qty
Spare Key for Super Pass II Device	$16.99

Full Product Info

Features and Specifications:

• SuperPass Sensing by Motion Only or by Lack of Motion/Heat Sensing
• Heat sensor responds to environmental conditions as temperatures rise
• Heat option typical response (environment temperature and alarm response time)
  • 350°F, 6 minutes
  • 300°F, 8 minutes
  • 250°F, 10 minutes
  • 200°F, 12 minutes
  • Note: Response times listed are approximate due to the variance of environmental factors and the thermal inertia of the heat sensing system
• Motion sensor responds to an 18-23 second lack of motion:
  • Loud, sweeping, pre-alarm audio signals repeat with progressive intensity
  • L.E.D. display changes mode/pulsation rate
  • Entire case glows and changes color
• After lack of motion lasting 30-35 seconds, the unit goes to full alarm mode
• Alarm Audio Output: 98+ dBA minimum measured at 10 feet
• Sound Discernibility: 6 dBA against given background noise
• Motion Detector: Solid State Accelerometer
• Case: Rugged, high temperature, impact resistant, and translucent polycarbonate plastic
• Size: 3 3/16"H x 2 1/8"W x 1 5/8"D
• Battery: Uses one 9V alkaline battery (included)
• Weight: 7 oz. with battery (without key)
• Certifications: Intrinsically Safe, for use in Class 1, Division 1, Groups A, B, C & D hazardous locations (U.L. 913)
• 'Auto On' feature provides the next level of assurance that PASS are not only being worn, but are turned on 'automatically' when removed from the 'Storage' position
• After a lack of motion lasting approximately 30 to 35 seconds, the unit will go into the 'Alarm' mode. When in 'Alarm' the 'Pre-Alarm' display is replaced by the constant rapid pulsing of four red L.E.D.s, which is accompanied by loud audio 'Alarm' signal that rapidly varies in pitch. This feature is invaluable for recognizing and locating downed firefighters. Once in 'Alarm', pressing both side buttons simultaneously can reset the unit
• When in the 'Sensing' mode, the Super PASS II™ may be put into the 'Alarm' mode at any time by manually pressing the 'Alarm' button located on the front surface of the unit
• To turn the Super PASS II™ Off, simply replace the Accountability Storage Key, thereby returning the unit to the 'Storage' position, and simultaneously press both side buttons
• Also included:
  • Manual Alarm Button
  • Manual Reset Buttons
  • Grip Clip and "D" Ring
  • L.E.D.s cause the entire case to glow and change color during 'sensing', 'pre-alarm' and 'alarm' modes
  • Sound resonating ports
  • Personal accountability tag (with identification window for your photo, name, number, department ID)
  • 6-foot tether to anchor unit to a fixed storage position
• Accountability Storage Key's clear access window easily snaps into place to protect the enclosed information and provide instant access for rapid identification should the need arise
• Replacement keys are available (#2), sold separately
• Manufacturer's Warranty: One year from date of purchase
• Made in the U.S.A.